Diskuze: Problém s notebookom
Člen
Odpovídá na martin9171
Michal Žůrek - misaz:12.8.2016 18:25
Michal Žůrek - misaz:12.8.2016 18:25
tak to restartuj. Pravděpodobně ti selhal nějaký hardware (odhaduji pevný disk) ale přesně ti to řeknou zdejší Linuxoví mistři co rozumí přesně tomu co je tam napsané.
Marek Šimon:13.8.2016 0:03
Mohol by si poskytnúť hlavne lepšiu kvalitu fotky, kde tie spodné riadky budú čitateľné. Ale tiež sa pripájam k názoru, že ti odišiel disk. Je tam písané I/O error a sda1, sda2, sda3,.. sú alokované časti pevného disku pre rôzne účely, čiže je to dosť pravdepodobné.
Odpovídá na martin9171
VitekST:13.8.2016 22:59
VitekST:13.8.2016 22:59
I/O error, dev sda....
Vypadá to na pevný disk.
- Sežeň si náhradní PC a vypal si na DVD nebo na flash disk live linux distro.
- Zjisti S.M.A.R.T údaje toho disku (příkaz smartctl) a pošli nám výstup.
- Jestliže bude některý z údajů mimo normu (hlavně Reallocated Sectors Count a Spin Retry Count) disk s největší pravděpodobností odchází.
...=> co nejdříve si sežeň druhý disk a zálohuj si všechna
důležitá data. Už teď může být pozdě.
Můžeš zkusit i speciální utilitky na dolování dat (Unstoppable Copier,
Windows aplikace, můžeš použít Hiren's Boot CD nebo SharpSoft RescueCD pro
spuštění).
Pokud jsou data zálohována a máš peníze na nový disk, výměnu netřeba popisovat, je jednoduchá, pokud nebudeš hovado tak nemůžeš nic zkazit a neporušíš tím záruku (ve většině případů).
Pokud je ale notebook v záruce, jde o reklamovatelnou vadu, tudíž reklamuj!
martin9171:14.8.2016 13:34
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-34-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Laptop SSHD
Device Model: ST500LM000-SSHD-8GB
Serial Number: W371FFN6
LU WWN Device Id: 5 000c50 06e597ec8
Firmware Version: LVD3
User Capacity: 500 107 862 016 bytes [500 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun Aug 14 13:22:59 2016 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 139) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 97) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x1081) SCT Status supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 116 099 006 Pre-fail Always - 114027328
3 Spin_Up_Time 0x0003 099 098 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 098 098 020 Old_age Always - 2465
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 070 057 030 Pre-fail Always - 34456074845
9 Power_On_Hours 0x0032 093 093 000 Old_age Always - 6440
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 098 098 020 Old_age Always - 2413
184 End-to-End_Error 0x0032 097 097 099 Old_age Always FAILING_NOW 3
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 099 000 Old_age Always - 10
189 High_Fly_Writes 0x003a 063 063 000 Old_age Always - 37
190 Airflow_Temperature_Cel 0x0022 051 045 045 Old_age Always In_the_past 49 (Min/Max 47/49)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 114
193 Load_Cycle_Count 0x0032 087 087 000 Old_age Always - 27451
194 Temperature_Celsius 0x0022 049 055 000 Old_age Always - 49 (0 16 0 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 1
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1 occurred at disk power-on lifetime: 6361 hours (265 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 5a 22 40 06 Error: WP at LBA = 0x0640225a = 104866394
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 00 b0 08 08 84 48 00 00:00:40.245 WRITE FPDMA QUEUED
61 00 08 00 08 84 48 00 00:00:40.244 WRITE FPDMA QUEUED
60 00 00 c0 21 40 46 00 00:00:40.244 READ FPDMA QUEUED
60 00 00 30 3a 04 47 00 00:00:40.244 READ FPDMA QUEUED
60 00 08 c0 20 40 46 00 00:00:40.244 READ FPDMA QUEUED
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Josef Kuchař - Pepa489:14.8.2016 14:11
Editováno 14.8.2016 14:12
Tohle je jasný disk před failem:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 116 099 006 Pre-fail Always - 114027328
3 Spin_Up_Time 0x0003 099 098 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 098 098 020 Old_age Always - 2465
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 070 057 030 Pre-fail Always - 34456074845
9 Power_On_Hours 0x0032 093 093 000 Old_age Always - 6440
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 098 098 020 Old_age Always - 2413
184 End-to-End_Error 0x0032 097 097 099 Old_age Always FAILING_NOW 3
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 099 000 Old_age Always - 10
189 High_Fly_Writes 0x003a 063 063 000 Old_age Always - 37
190 Airflow_Temperature_Cel 0x0022 051 045 045 Old_age Always In_the_past 49 (Min/Max 47/49)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 114
193 Load_Cycle_Count 0x0032 087 087 000 Old_age Always - 27451
194 Temperature_Celsius 0x0022 049 055 000 Old_age Always - 49 (0 16 0 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0PS: Doporučuju ihned zálohovat a vyměnit/reklamovat disk/notebook
Děláme co je v našich silách, aby byly zdejší diskuze co nejkvalitnější. Proto do nich také mohou přispívat pouze registrovaní členové. Pro zapojení do diskuze se přihlas. Pokud ještě nemáš účet, zaregistruj se, je to zdarma.
Zobrazeno 10 zpráv z 10.